B-Broom
DESCRIPTION
Each broom is 6' long with 24" long polypropylene bristles. Each bristle is .140 wide (slightly larger than 1/8").
USES
B-Brooms are water resistant brooms manufactured to install on the rear of a paving machine, to drag across the wet cement for a textured finish, similar to a Tine Broom.
FEATURES
Base of broom is 1" x 4" weather resistant wood. The bristles are glued into a slot on the board using 2 types of moisture resistant hot glue. There is a lattice support board placed approximately 10" from tips of the bristles to keep the tips in place and prevent separation.
DESCRIPTION
Each broom is 6' long with 24" long polypropylene bristles. Each bristle is .140 wide (slightly larger than 1/8").
USES
B-Brooms are water resistant brooms manufactured to install on the rear of a paving machine, to drag across the wet cement for a textured finish, similar to a Tine Broom.
FEATURES
Base of broom is 1" x 4" weather resistant wood. The bristles are glued into a slot on the board using 2 types of moisture resistant hot glue. There is a lattice support board placed approximately 10" from tips of the bristles to keep the tips in place and prevent separation.
DESCRIPTION
Each broom is 6' long with 24" long polypropylene bristles. Each bristle is .140 wide (slightly larger than 1/8").
USES
B-Brooms are water resistant brooms manufactured to install on the rear of a paving machine, to drag across the wet cement for a textured finish, similar to a Tine Broom.
FEATURES
Base of broom is 1" x 4" weather resistant wood. The bristles are glued into a slot on the board using 2 types of moisture resistant hot glue. There is a lattice support board placed approximately 10" from tips of the bristles to keep the tips in place and prevent separation.